How to walk a patient with a gait belt
Other platforms explain it with text and video. In VMS you practice it on the patient.
A gait belt gives you a safe grip. If the patient starts to fall, guide them down.
Step by step
Prepare
Non-slip shoes, clear path, devices ready. [1]
Belt
Around the waist, two fingers under it. [1]
Position
Slightly behind on the weaker side, hand on the belt. [1]
Walk
Short distance first, watch for dizziness. [1]
If they fall
Widen your stance, pull them close, slide them down your leg to the floor. [1]
After
Check for injury before getting them up; report. [1]
Common errors
- Holding the arm instead of the belt.
- Trying to stop a fall.
- Too long a walk first time.
Practice it in VMS
In VMS you do this on the patient, not on paper: every step goes on the checklist with a score, and in Teach mode Blocky tells you what comes next.
VMS cases that train this skill
Sources
- Open RN, Nursing Fundamentals 2e (CC BY 4.0)
- Open RN, Nursing Skills 2e (Chippewa Valley Technical College) (CC BY 4.0)
- OpenStax, Clinical Nursing Skills (CC BY 4.0)
Steps adapted from Open RN, Nursing Skills 2e (Chippewa Valley Technical College) and OpenStax, Clinical Nursing Skills, licensed under CC BY 4.0. VMS is not affiliated with these organizations. Updated: 2026-10-11.